Features:
(1) Dynamic and static dual-use: UV disinfection is dynamic disinfection (human and machine can coexist), ozone fumigation disinfection is static disinfection (disinfection in unmanned state), two disinfection modes can be selected at will; long-life C-band high-intensity ultraviolet cycle Wind continues to disinfect;
(2) High-efficiency high-concentration ozone fumigation disinfection
(3) Negative ions eliminate smoke, dust, odor, and clean air;
(4) Electrostatic adsorption of negative ions to remove smoke, dust and bacteria;
(5) Activated carbon antibacterial and odor removal
(6) Far-infrared remote control operation, automatic operation of microcomputer program control.

Medical Hygiene Air Handling Unit:
The design of operation room hygiene purification air conditioning unit that Cold Magic produced for hospitals / pharmaceutical factories use, which is re-optimize the unit configuration. The sterilization function is added on the basis of dust removal function. Special emphasis is placed on comprehensive control of bacteria with comprehensive measures to eliminate possibility of bacteria breeding..
In the initial stage of the unit, the dust and bacterial clusters are intercepted and filtered, it can control and reduce the amount of subsequent internal bacteria from the source. The sterilization device is installed in the unit, which can be very convenient and effective to disinfect and sterilize continuously inside the cabinet, so that the unit fully meets the requirements of clean environmental control.

Features:
1. Use international brand or domestic high-quality brand HVAC frequency inverter;
2. The use of frequency inverters can effectively reduce energy consumption and operating costs;
3. Match to the air handler can realize the function of variable air volume;
4. Variable frequency starting can reduce the impact of starting current on the net work during starting, thereby reducing the cost of power capacity expansion;
5. Power supply, operating status, fault status, remote/local status indication;
6. Automatic (remote) / manual (local) two control modes;
7. Overload, lack of phase, under voltage and short circuit indications are perfect to realize comprehensive protection.
Air handlers are including: horizontal concealed installation, vertical concealed installation, vertical exposed installation, ceiling type, etc...; in additional, special specifications can be produced according to customer request.

Features:
1. Use international brand or domestic high-quality brand HVAC dedicated inverter;
2. The use of frequency converters can effectively reduce energy consumption and operating costs;
3. The function of variable air volume can be realized by matching on the air handler;
4. Frequency conversion starting can reduce the impact of starting current on the grid during starting, thereby reducing the cost of power capacity expansion;
5. Indication of power supply, running status, fault status, remote/local status;
6. Two control modes: automatic (remote)/manual (local);
7. Overload, phase loss, undervoltage and short circuit indications are perfect, realizing comprehensive protection.

Evaporative Cooled Condenser Packaged Water Chiller:
1. Integrated design: built-in cooling water pump, heat exchanger has been treated specially, so that the product life cycle can be prolonged when heat exchanger is cooled with water. It has an inhaled water descale, and the life of product can be protected.
2.Less space occupied: The equipment is light and handy, no cooling tower and cooling water pump are required, no cooling water circuit is needed, and without request of cooling system control box.
3. Quick installation: Quick connection for water and electricity, speed up on site installation.
4. 30% energy saving: the Coefficient of performance the of the air conditioning unit is greater than 4.9, and the integrated partial load efficiency IPLV reaches 8.2 or more. Under standard operating conditions, the whole machine has a high Coefficient of performance, which is more than 15% energy-saving than traditional water-cooled chillers, and more than 30% energy-saving than ordinary air-cooled chillers. The Coefficient of performance exceeds the international first-class energy efficiency standards.
5. Advantages: high anti-corrosion performance, high unit stability; compact structure, reasonable layout; equipped with a descaling device to prevent fouling; advanced logic control, by using fuzzy logic, precise control of load changes, and the operation is more stable.

Features of Oil-free Water Cooled Chiller:
1. Magnetic bearings, energy consumption is lower at least 10%;
2. Fully enclosed bipolar centrifugal compression, inter-stage air supplement, cooling capacity increased by at least 10%;
3. No mechanical friction, noise is less than 74dB (A)
4. Evaporative evaporator, the charge of refrigerant is reduced 30%;
5. High-speed permanent magnet synchronous motor cooled by refrigerant, efficiency up to 97%;
6. Small size, light weight, wide range of speed;
7. The safety protection system allows the compressor and unit to start and restart quickly.

1. Integrated design: built-in cooling water pump, heat exchanger has been treated specially, so that the product life cycle can be prolonged when heat exchanger is cooled with water. It has an inhaled water descale, and the life of product can be protected. 2.Less space occupied: The equipment is light and handy, no cooling tower and cooling water pump are required, no cooling water circuit is needed, and without request of cooling system control box. 3. Quick installation: Quick connection for water and electricity, speed up on site installation. 4. 30% energy saving: the Coefficient of performance the of the air conditioning unit is greater than 4.9, and the integrated partial load efficiency IPLV reaches 8.2 or more. Under standard operating conditions, the whole machine has a high Coefficient of performance, which is more than 15% energy-saving than traditional water-cooled chillers, and more than 30% energy-saving than ordinary air-cooled chillers. The Coefficient of performance exceeds the international first-class energy efficiency standards. 5. Advantages: high anti-corrosion performance, high unit stability; compact structure, reasonable layout; equipped with a descaling device to prevent fouling; advanced logic control, by using fuzzy logic, precise control of load changes, and the operation is more stable.

Mobile Air Cooled Package Chiller:
This series of product is one of the leading professional produced by Cold Magic Company Limited. Cold Magic brand Air Cooled Water Chiller (Heat Pump) unit has the advantages of high energy efficiency ratio, low noise, compact structure, long product life and easy operation. The capacity range is from 48PT to 400RT, and it can provide chilled water at 5-20 degree Celsius, or hot water at 40-60 degree Celsius (heat pump). It is the air conditioning system that widely used in hotels, restaurants, supermarkets, schools, hospitals, factories, and large, medium and small building, etc… It is for civil or industrial use to provide chilled water (hot water).
1.The "heart" of the unit is an imported twin-screw compressor. Compared with the traditional reciprocating compressor, it has characteristics of high efficiency, quiet operation, user friendly and long life.
2.The use of microcomputer controller and PID logic control makes the temperature control more precise; programmed logic can effectively adjust the energy of the unit to ensure the best operating load and reduce operating costs. Light touch button operation, LCD backlight, Chinese or English display can be selected; plus a menu-style interface display, the operation is more convenient and easy to be used.
3.Protective device: exhaust non-return valve,three phase protection, high-efficiency oil separator, oil heater, exhaust temperature overheat protection, safety valve, high and low pressure switch, antifreeze switch, overload protection, parameter password authority protection.

The Dehumidification Air Conditioning Cabinet is designed for products that require high dehumidification and the environmental temperature must be suitable, especially for manufacturers need specific environmental requirements. Mainly to be used in pharmaceutical factories, food processing factories, coffee factories, etc.